91+ 9823804196

svelectronics@live.com

PRODUCTS

Pelican 3000M Bi-Directional Inverter

This bi-directional inverter is so unique, that it makes it suitable for computer and IT applications also. Thanks to its smart design, which offers less than 5 ms changeover time. Another important yet unmatched feature is that it comes with inbuilt IGBT based rectifier charger. This gives near unity power factor, and minimal distortion levels on to the supply side. Add to this, the basic modules N x 10 kW / N x 15 kW of Pelican 3000M inverters are designed to work in parallel giving redundancy in case of failure of any module working in parallel which makes it most suitable and reliable inverter for the Telecom operation. The combined effect of all these special features make Pelican inverter a new generation inverter giving best ROI to it’s user.

  • Multiple 32 bit DSP controllers
  • Inbuilt IGBT based battery charger
  • Space Vector Modulation
  • High efficiency
  • True Bi-directional Inverter
  • Modular construction gives higher MTTR (above 30 kVA)
  • Changeover time 5ms
  • Battery charging through Grid up to 100%
  • Inbuilt isolation transformer for galvanic isolation
  • 128 x 64 Graphics display
  • Input current balancing which forces balanced current on mains, even if, load current is unbalanced
  • Load voltage balancing, even if, mains voltage is unbalanced
  • In case of abscence of any input phase, that particular phase is created by the inverter to feed the load

System Rating(kVA)

10 15 20 30 45

Mains Input

Input Supply

415 VAC , 50 Hz (-20%, +15%),3 Phase 4 Wire

Battery

Battery Voltage

48V (Optional 96V, 120V)

Active Filtering during load on mains

(Load Harmonic corrections)

THDi up to 3 % & Power Factor > 0.99

Inverter

Power in KW

8 12 16 24 36

Switching Element

IGBT

Control

32 Bit DSP controlled

Nominal Output Voltage

415 VAC L - L, 3 Phase 4 Wire

Nominal Frequency

50 Hz

Output Waveform

Sine Wave

Load Power Factor

0.6 lag to 1 (within kVA and kW rating)

Voltage regulation

± 2%

Voltage Stability in dynamic condition

Complies with IEC/EN 62040-3, Class 1

Output voltage distortion with 100% linear load

< 2%

Change overtime

< 5ms

Inverter efficiency

Up to 90%

Protection degree

IP 20

Colour

RAL 7016, Texture

Cooling

Forced Air

Galvanic Isolation

Inbuilt isolation transformer at inverter output

Protection

Under / Over voltage for Input, Output & Battery

Output overload, Short circuit, Over temperature

Display Parameter

1. Battery - Voltage, Current

2. Mains - Voltage, Current

3. Inverter - Voltage, Current, Inv. heat sink temp. Power

Indications

Battery on Float, Battery on Boost, Battery low, Battery Charging / Discharging,

Mains Switch ON, Inverter Switch ON, Mains ON, Load ON, Inverter ON, Manual Bypass ON,

Environment

Temperature Operating

0 to 40° C

Temperature Operating

0 to 40° C

Max. Relative humidity @ 25°C (non condensing)

Up to 95%

Acoustic Noise @ 1m (Ref. ISO 3746)

≤ 62 dBA ≤ 65 dBA ≤ 68 dBA

Max. Altitude above sea level without de-rating

1000 m

Standard Compliance

Testing

IEC 62040 - 3

...